5
6
7
23
Adjusting the back support angle
The angle of the backrest to the seat
surface can be adjusted from +6° to -
18°.
– Swivel up the arm support.
– Loosen the counter nuts (5) of the
stopper screws in the frame tube.
– Screw in end stop screws (6) if nec-
essary.
– Loosed the clamping screws (7) on
each side.
– Readjust the angle of the back sup-
port.
– Retighten the clamping screws (7)
on each side.
– Unscrew the stopper screws (6) as
far as possible onto the respective
frame tube.
– Retighten the counter nuts (5) of
the stopper screws.
– Reinsert the arm supports.
☞
Note:
For this observe chapter < Inserting
the arm support >.
!
Attention:
We recommend to adjust the back
support vertically to the driving
surface. – Otherwise increased
danger of tilting!
Summary of Contents for FX One 1.150
Page 1: ...GB We move people OPERATING MANUAL ACTIVE WHEELCHAIR FX ONE Model 1 150...
Page 51: ...51 NOTES...
Page 52: ...52 NOTES...
Page 53: ...53 NOTES...
