1
2
24
WHEELS
Drive wheels
After inserting the drive wheel the locking
button (2) must stick a couple of millime-
tres out of the wheel nut.
The drive wheels are supported on a quick
release axle [1] and can be removed resp. at-
tached without tools.
First press the locking button (2) of the
quick release axle in the center of the hub.
Afterwards remove or attach the drive
wheel.
☞
The air pressure value for the tyres of
the wheelchair can be read in the
Tech-
nische Daten
auf Seite 35 or details on
both sides of the tyre cover.
☞
If the drive wheels has too much side-
ward lag or the quick release axle does
not engage, contact your specialist
dealer immediately for repair.
☞
No person may be seated in the wheel-
chair during assembly or removal. The
wheelchair should stand on a level and
firm surface. Before starting the disas-
sembly work, support the frame to pre-
vent the wheelchair from tipping over
and secure it to prevent an unwanted
movement or tipping over.
Tyre damage on pneumatic tyres
☞
For repairing tyre damage we recom-
mend the use of a foam cartridge that
is available in speciality shops. – After-
wards look up a specialist workshop as
soon as possible.
