1
2
3
18
BACK SUPPORT WITH AN-
GLE ADJUSTMENT
Before any actions on the back supports
the wheelchair is to be secured against
unintentional rolling motions.
☞
Adjusting the angle of the back
support
The angle of the back support [1] is contin-
uously adjustable through the gas pressure
spring.
Activate the right lever (3) on the push han-
dle for continuous angle adjustment of the
back support.
☞
In doing so use both push handles,
resp. the push bar as a lever and adjust
the back support accordingly. – Danger
of overturning!
☞
The adjustment should only be car-
ried out under the weight of the
user.
After the angle adjustment release the lever
(3).
☞
Check to ensure that the back support
and seat unit are locked in place.
