background image

Metz moover

Original-Betriebsanleitung

Thank you for choosing a Metz “Made in Germany” quality product.

We are pleased to welcome you as a customer.

To begin with, we would like to provide you with some important informa-

tion on your new Metz moover. This will help you use the technology better 

and avoid risks. 

Please read through these operating instructions carefully and keep them 

safe.

Your electrically-assisted scooter can be handed over to you in a completely 

pre-assembled state or not completely mounted and adjusted. Please con-

tact your specialist dealer for this important work or follow the instruction 

in the “Assembly” chapter on page 3.

It is assumed that the users of this Metz moover have fundamental and suf-

fi cient knowledge on how to deal with scooters. They are not instructions to 

teach you how to drive. 

All persons that

•  use

•  repair or maintain

•  clean

•  or dispose of the Metz moover

must fully acknowledge and understand the content and meaning of these 

operating instructions. If you have other questions or have not fully under-

stood something, please ask a Metz moover specialist dealer for your own 

safety.

All the information in these operating instructions refer to the setup, tech-

nology and care and maintenance. Please observe this information, a lot of 

it is safety related - non-observance of this information can result in serious 

accidents and economic losses. 

We have described the most important points due to the complex technolo-

gy of a modern Metz moover. 

The instructions apply to the Metz moover indicated on the envelope that 

was given to you.

Before you drive on public roads, please gather information about the re-

spectively valid national regulations.

Always be aware that driving the Metz moover can harbour certain risks. As a 

driver you are particularly vulnerable. Always be aware that you are not as pro-

tected as you would be in a car. You do not have an airbag or body work. Never-

theless, you are faster than a pedestrian in other areas of the road. Pay particu-

lar attention to other road users.

First a few pointers for the persons driving that must also 

be observed:

•  Always  wear  an  adapted  and  suitable  bicycle  helmet 

and use it on every journey!

•  Gather information on the correct fi t of the helmet in 

the helmet manufacturer’s instructions.

•  Always wear bright clothing or sportswear with reflective elements while 

driving; it is important TO BE SEEN.

•  Wear appropriate shoes. Your shoes must have anti-slip soles.

•  Never drive without holding onto the handlebar!

•  Always drive by placing both hands on the handles. 

•  Never drive with headphones

•  Do not use the telephone

•  Never drive if you are not able to fully control your journey. This holds 

particularly true if you consumed medication, alcohol or other drugs.

Dear customer

C2

Cont-d on C4

Summary of Contents for moover









































Reviews: