Metz mecablitz 64 AF-1 digital, Operating Instruction

Page: 830 / 1614

10.2.3 Setting the slave group
• Press the sensor button on the touch
display for the channel group (e.g
).
The window for selecting the channel and
group appears.
• Press the sensor button on the touch
display for the group .
• Press the sensor buttons on the
touch display to select the desired group
“A”, “B” or “C”.
• Press the sensor button on the touch
display for the selected group, e.g.
.
The setting will take effect immediately. “B”
appears on the display
Gr A I Ch2
GROUP
GROUP B
10.3 Testing remote flash mode
• Place the slave flash units in the desired
positions for the shot. Use flash unit moun-
ting foot S60 (optional accessories) to set
up the slave flash unit.
• Wait for all of the flash units involved to
become flash ready. Once the slave flash
units are flash ready, the AF auxiliary ligh
헀
will blink.
• Take a test shot and check whether the sla-
ve flash unit(s) respond.
• If the slave flash unit does not flash, correct
the position of the slave flash unit so that it
can receive the light from the controller
flash unit or reduce the distance between
the controller flash unit and the slave flash
unit.
• Following the successful completion of the
flash test, you can start taking shots.
170
k
M-
Zoom 24
REMOTE
SLAVE
Gr Ch
B 2
i
m
m
SLAVE
CHANNEL
GROUP
GROUP
q
p
GROUP A
GROUP B
GROUP C
M-
Zoom 24
REMOTE
SLAVE
Gr Ch
A 2
i
m
m