Metz mecablitz 64 AF-1 digital, Operating Instruction

Page: 1470 / 1614

10.1 Remote master mode settings
The slave groups RMT and RMT2 are activated
at the factory.
The master flash unit (CTRL) and the slave
groups RMT and RMT2 can be activated or
deactivated!
If the master flash (CTRL) unit is deactivated,
it only controls the slave units and does not
contribute to exposing the shot.
10.1.1 Remote master mode settings
• Switch on the flash unit with the
햳
button.
The start screen appears.
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
selecting the mode of operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on
the touch display.
Remote master mode is set.
Remote master mode CTRL+ is shown in the
picture. The master (CTRL) contributes in the
same light conditions to exposure at the sla-
ve flash groups (RMT).
Light conditions can be assigned to master
(CTRL) and slave flash group RMT or slave
flash group RMT2 (see 10.1.4).
REMOTE MASTER
REMOTE MASTER
Switch from CTRL to CTRL+
• Press the
햸
button as often as it takes
for the selection menu to appear.
• Press the sensor button on the
touch display.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the
touch display.
• Press the sensor button on the touch
display for the desired mode of operation
or alternatively .
The setting will take effect immediately
Light condition control (ratio) is only possi-
ble in CTRL+ mode.
PARAMETER
CONTROL
CONTROL
CTRL+ CTRL
182
k
0.6- 7.2 m
M-
Zoom
35 m
m
TTL
i
EV
MODE
q
p
STROBO
REMOTE MASTER
REMOTE SLAVE
CTRL RMT
4 8
REMOTE
CTRL
TTL
i
RATIO
CTRL RMT RMT2
4 8 1
REMOTE
CTRL+
TTL
i
RATIO
PARAMETER
PARAMETER
q
p
RATIO
CONTROL
CTRL/CTRL+
CTRL
CTRL+
+