Metz mecablitz 64 AF-1 digital, Operating Instruction

Page: 174 / 1614

Setting the mode of operation
• Switch on the flash unit with the 햳
button.
The start screen appears. Thereafter, the
flash unit always switches on with the
mode of operation that was used last .
• Press the sensor button of the displayed
mode of operation on the touch display as
many times as it takes for the display for
selecting the mode of operation to appear.
• Press the sensor buttons on the
touch display and select .
• Press the sensor button on the touch
display.
• Set a suitable mode of operation on the
camera, e.g. .
• Tap the shutter release to transfer data bet-
ween the flash unit and the camera.
M
M
M
Various cameras support manual flash mode
M only in the camera's M mode (manual).
In other camera models, an error message
appears in the display and the release is
locked.
Manual partial light output levels
Partial light output can be set in manual flash
mode .
Setting procedure
• Press the sensor button for partial light out-
put on the touch display as many times as
it takes for the partial light output display
to appear.
• Press sensor buttons on the
touch display and set the desired partial
light output to 1/1, 1/2, 1/8 . . . 1/256.
• Press the sensor button on the touch
display for the selected partial light output.
The setting is immediately effective and
automatically saved.
The distance display is adjusted to the partial
light output automatically (see 5.2).
M
+
174
9.0 m
F
5,6
M-
Zoom
35 m
m
M
i
P
1/1
MODE
O
q
p
A
M
STROBO
0.8- 9.0 m
F
5,6
M-
Zoom
35 m
m
ETTL
i
EV
0.8- 9.0 m
F
5,6
M-
Zoom
35 m
m
ETTL
i
EV
9.0 m
F
5,6
M-
Zoom
35 m
m
M
i
P
1/1
3.1 m
F
5,6
M-
Zoom
35 m
m
M
i
P
1/8
P
O
q
p
1/1
1/1 - 1/3
P
O
q
p
1/4 - 2/3
1/8
1/8 - 1/3
k