manualshive.com logo in svg

Metz Linea LED 100, Operating Instructions Manual

Share
Download
Metz Linea LED 100 Operating Instructions Manual Download Page 7

7

2 Safety notes

• Do not place

- burning candles or 
vessels containing liquids (vases, etc.)
on top of the TV set, since any hot wax
or water dripping into the set could
cause serious damage to the electronic
components and could also jeopardize
the electrical safety of the set. 

• Lightning can damage electrical equip-

ment. A lightning flash entering the
power cable or the aerial cable can
damage the TV set even if it is swit-
ched off. You should therefore discon-
nect the power cable and aerial cable
from their outlets or from the TV set in
the case of a thunder storm.

• The monitor may be opened and

repaired only by a qualified person. 

CAUTION! HIGH VOLTAGES CAN KILL !

If repairs should be necessary, consult
your local dealer.

• Always switch off the TV set before

cleaning it.

• Do not hold the remote control directly

in front of your eyes and press a but-
ton. The remote control emits infrared
radiation!

• Do not place rechargeable batteries in

the battery compartment of the remote
control. Use only two 1.5 V dry batte-
ries of the type LR03/AM4/AAA
(Micro).

• The TV set is intended only for the

reception and reproduction of picture
and sound signals.

• The TV set may be operated only from

a mains voltage of 230-240V VAC, 
50 Hz. Australia: 240 VAC.

• For maintenance and repair work, the

power plug or the power-cord input of the
TV represents a means to disconnect the
device from the mains and must therefore
be kept in a usable state in line with appli-
cable standards.

• Lay the power cable so that nothing

stands on it and no-one can trip over it.

• Do not display still images, logos, 4:3

pictures with stripes etc. over an exten-
ded period. These still images can
result in marks on the screen.

• Keep candles and open flames away

from this product at all times to prevent
fire spreading.

• Grime and dust deposits can accumu-

late behind the front panel glass of the

LCD TV set without a visible source

being present. These grime and dust

deposits are also known as „fogging“

or „magic dust“. There are scattered

instances of this phenomenon, but

especially during the warm-up period

and after renovation work or in new

constructions. Various factors can cau-

se the above mentioned phenomenons,

see also reports on the Internet.

In such cases cleaning or replacement

of the panel is excluded from the 

guarantee, since it does not involve a

set defect, but rather an external

influence.

Summary of Contents for Linea LED 100





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands