manualshive.com logo in svg

Metz Linea LED 100, Operating Instructions Manual

Share
Download
Metz Linea LED 100 Operating Instructions Manual Download Page 4

4

• Take care that no bright artificial light

or sunshine falls directly on the screen.

This could cause reflections which have

a negative effect on the brilliance of

the picture.

• The best viewing distance is five times

the screen diagonal, i.e.

- Approx. 2 m (6.3 ft) for 26" screens

- Approx. 2.4 m (7.6 ft) for 32" screens

- Approx. 2.8 m (9 ft) for 37" screens

- Approx. 3.2 m (10.3 ft) for 42" screens

- Approx. 4.2 m (13.8 ft) for 55” screens

This distance can also be reduced by

one half for HDTV.

• The antenna cable and any other com-

ponents (such as a video recorder)

connected between the antenna socket

in the wall and the TV set must comply

with the European standard 

EN 60966-2-4.

• The antenna cable used for connecting

the TV set must have a screening atte-

nuation of at least 75 dB.

• The use of non-approved cables will

invalidate the operating permission for

the TV set.

1 Installation

• Only use Metz bases as a stand for the

LCD TV.

• If you want to mount the TV set on the

wall, only Metz wall brackets should be

used. Furthermore, only specialists should

carry out such work.

• The TV set should not be mounted on the

ceiling.

• To prevent injuries, the TV set must be fas-

tened safely to the floor / wall in accor-

dance with the installation instructions.

• Strong tobacco  consumption at the

installation location of the TV  can  lead

to nicotine and soot deposits behind the

panel glass and thus to an impair-

ment of the image quality.  Such depo-

sits can only  be removed  by a specia-

list. In extreme cases  the panel   may

be damaged permanently, which may

require to replace the panel. 

The cleaning and / or the replacement

of the panel is  not covered by  warran-

ty claims.

This TV set is exclusively designed for the
reception and replay of picture and
sound signals.
The TV set is designed for dry rooms
(living rooms and offices).
The room climate should be in a range
from +5°C to +35°C with 75% air humi-
dity.
The TV set must not be used in rooms
with higher air humidity (e.g. bathroom,
sauna, etc.).

The TV set must not be used in rooms
with a high concentration of dust (e.g. a
workshop).
If, as an exception, you operate the TV
set outdoors, then please make sure that
it is protected against moisture (rain,
water spray, dew).

1.1 Proper use

Summary of Contents for Linea LED 100





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands