47
12.7 Connecting Headphones
The headphones connector
(3.5 mm jack) is located on
the left-hand side, see also
Chapter 28 „
Connections to
the set
“.
Radio headphones can also
be connected to the AUDIO
OUT sockets on the back of
the TV set, see also Chapter 28,
„
Connections to the set
“.
The sound settings for the radio head-
phones should then be set as described
on page 44.
We recommend headphones with impe-
dance that is not less than 32 Ohm.
For headphones with less impedance
(approx. 8 Ohm), the dynamic range is
smaller.
The headphones volume can be saved as
a default value (see Chapter 12.)
Setting the volume too high
when using headphones or ear-
phones can result in damage to
the ears - including the complete
loss of hearing.
When receiving a dual-language pro-
gramme, you can switch between the
two sound channels.
In TV mode, press and hold the yellow
key
until the sound function "Sound
mode" is selected.
Then use the
– +
key to select Sound 1
or Sound 2.
12.8 Sound 1, Sound 2
Kopfh. Lautst.
Kopfh. Ton 2
Kopfh. Lautst.
Ton über
Ton-Mode Ton 2
Balance
Audio OUT, jack Ø 3.5 mm
To connect a hi-fi amplifier or radio headphones, for example.
You will need an adapter cable to do this:
from a 3.5 mm stereo jack to a 2-cinch connector
Headphone socket,
diameter 3.5 mm
