6
1.2 Connecting and switching on
• Always place the monitor on a solid,
stable surface.
• If a cold TV set is moved to a warm
room, always allow any condensation
on the screen to evaporate before swit-
ching it on.
• The TV set is intended for use in a dry
room. If, in exceptional circumstances,
you use it outdoors, take care that is
protected against moisture (rain, splas-
hed water, dew).
• Do not expose TV set to dripping or
splashes (e.g. rain)!
• TV sets need adequate ventilation.
Never cover the openings on the rear of
the set with curtains, doilies, newspa-
pers, etc. Also take care that the slits in
the bottom of the case are freely acces-
sible so that the intake of the cooling air
is not hindered.
• If you place the TV set in a wall unit,
leave sufficient space on all sides for
the circulation of cooling air.
• Do not place the TV set close to a radi-
ator, since this would effect adequate
cooling.
Switching on from stand-by mode
Use the numeric keys of the remote con-
trol to select any programme.
Programme position 1 is selected by pres-
sing the key
or TV. If an initial pro-
gramme position has been configured,
this will be switched on. See also chapter
24 – Initial Programme Position.
The LED is green.
Switching off
You can switch the TV set to stand-by
mode by pressing the key
on the
remote control.
a)
If EPG data is collected when the
TV set is stand-by mode, the orange
LED will light up (see also chapter
19.2 Collecting EPG data).
b)
If the red stand-by indicator is on,
we recommend cutting the power to
the TV set by pressing the power
switch.
Delivery contents
• TV set
• Remote control plus 2 AAA
batteries
• Power cable
• User guide
2 Safety notes