Mettler Electronics Corp.—
Rev.F_09/13/17
6
The Sys*Stim 294 was certified by Intertek Testing Services to meet the requirements for
ETL Listing per the following standards:
UL 2601-1-UL Standard for Safety–Medical Electrical Equipment, Part 1:
General Requirements for Safety Second Edition.
CAN/CSA C22.2 NO 601.1 – Medical Electrical Equipment – Part 1:
General Requirements for Safety
IEC60601-2-10 – Safety of Nerve and Muscle Stimulators
In addition, the Sys*Stim 294 meets the following standards for radio frequency emissions:
EN 60601-1-2
EN–55011 (CISPR–11)
Mettler Electronics Corp. has been certified by VTT Expert Services LTD to be compliant
with EN ISO 13485:2003 and MDD 93/42/EEC Annex II requirements. In addition, Mettler
is certified by DQS Medizinprodukte GMBH to be compliant with ISO 13485:2003
(CMDCAS) Canadian Medical Device requirements.
1.2 Introduction to This Manual
Read the contents of this manual before treating patients with the Sys*Stim 294.
This manual has been written to assist you with the safe operation of the Sys*Stim 294. It is
intended for use by the owners and operators of the Sys*Stim 294. The goal of this manual
is to direct the correct operation and maintenance of this unit.
The specifications and instructions presented in this manual are in effect at the time of its
publication. These instructions may be updated at any time at the discretion of the
manufacturer. Please fill in the warranty card to assure that you will be updated on
changes should that become necessary. You may also go to our website at,
http://www.mettlerelectronics.com/product-registration/ , to register your product.
1.3 Safety Precautions
The Sys*Stim 294 operates with high voltages. Qualified biomedical technicians with
training in neuromuscular stimulator service should perform servicing of the Sys*Stim 294
or it should be returned directly to the factory. To maximize safety during use, the unit
should be plugged into a grounded wall outlet. General safety guidelines for medical
electronic equipment should be followed.
Service may be obtained from the manufacturer by sending the Sys*Stim 294 in its original
shipping container to Mettler Electronics Corp., 1333 South Claudina Street, Anaheim, CA
92805, ATTN: Service Department. (Telephone toll free: (800) 854–9305, Email:
,
Alternate telephone number: 1 (714) 533–2221
)
NOTE: All warranty repairs must be performed by Mettler Electronics Corp. or by a
service facility authorized by Mettler Electronics to perform warranty repair work.
A service manual for the Sys*Stim 294 is available from Mettler Electronics Corp. for a
nominal charge.
