Sys*Stim 294 Instruction Manual—
Rev.F_09/13/17
5
Section 1: Introduction
1.1 Introduction to the Sys*Stim 294
Thank you for purchasing the Sys*Stim 294 four-channel neuromuscular stimulator. The
microprocessor controlled Sys*Stim 294 provides interferential, premodulated, medium
frequency, symmetrical biphasic, high volt and microcurrent waveforms with enhanced
reliability and ease of use.
The four–channel Sys*Stim 294 allows you to utilize up to four different waveforms using
four channels simultaneously. You can choose between several different amplitude
modulation options such as the surge, reciprocation and vector rotation. The interferential
and premodulated modes offer frequency modulation as well as a static frequency option.
Figure 1.1— Sys*Stim 294
The membrane panel provides both tactile and audio feedback when buttons are pressed.
Blinking LED’s guide you through the easy setup routine. The new Treatment Status
Indicator shows you which stimulation waveform has been chosen for treatment. The
status display moves when treatment output is active.
Large, soft-touch control knobs make adjusting stimulation intensity easy to accomplish
with no guesswork involved. Two LED output displays allow you to monitor two
channels simultaneously. These also allow you to adjust both channels of an interferential
protocol simultaneously while monitoring the current.
The Sys*Stim 294 can provide electrical stimulation from four channels. Add the optional
treatment cart to create a mobile treatment center for your office.
