Mettler Electronics Corp. — Rev.I_09/23/19
32
4.5 Using Preset Programs
1.
Press the “Info” button.
2.
You will get the screen to the right. Use the M Wheel to scroll to
either “Electrical Stimulation”, “Light Therapy” or “User Defined
Protocol”. Press “Enter” when you get to the one that you would
like to use.
3.
You may choose between anatomical or general protocols for
electrical stimulation or light therapy. For electrical stimulation you
may also choose a protocol by waveform type.
4.
Each protocol will have a treatment diagram, some notes and the
treatment parameters on one screen. If this is the one you want,
you will press the “Enter” key to go to the treatment screen.
5.
Once you get to the treatment screen, you can change any of the
parameters shown. You would set up the patient for the protocol
that you are using. For electrical stimulation follow the instructions
in section 4.3. For light therapy follow the instructions in section
4.4.