6 N1 70 en
21
4.5.3
Pneumatic cylinder module
reassembly
Step 1.
Install outer o-ring (32) and rod seal (23) on guide
bush, lubricate guide bush. Install assembly in front cover (3).
Step 2.
Install retaining ring (36) on guide bush.
Step 3.
Install o-ring (24, 31) on front cover apply film of lubricant on cover o-ring then install front cover on central block (11).
Step 4.
Install outer o-ring (29) and internal x-ring (35) on
guide bush (7), apply lubricant on outer and inner diameter
of guide bush (7) then install guide bush in piston (6).
Step 5.
Install retaining ring (50) on guide bush (7) to hold
the guide bush in piston (6).
NOTE:
The actuator must be in appropriate over travel position
Summary of Contents for Neles N1 Series
Page 35: ...6 N1 70 en 35 ...
