DRIVING INSTRUCTIONS
DRIVING INSTRUCTIONS
D100014616-EN
398 0 EN 2021-06-22
17
2
1
Figure 23: Driving socket location
NOTICE:
• If a fault is detected in the connection of the drive control device
plug to the socket, an alarm is displayed on the control panel. To
acknowledge the alarm, disconnect and reconnect the drive control
device plug.
• The drive control device cannot be used if the radio control mode is
switched on.
4. On the main control panel, make sure that the radio control mode ON/OFF switch is in position 0
(OFF).
Figure 24: Radio control switch in position 0 (OFF)
1.8.2. CONNECTING THE RADIO CONTROL DEVICE
NOTICE:
Before using the radio control device, check if the local laws and regulations
allow the use of radio signals.
1. Activate the radio control device: On the main control panel, turn the radio control mode ON/OFF
switch to position 1 (ON).
