DRIVING INSTRUCTIONS
DRIVING INSTRUCTIONS
D100014616-EN
398 0 EN 2021-06-22
7
NOTICE:
Make sure that the radio control device is stored properly to avoid damages,
dirt, and water.
1.6. PREPARING FOR DRIVING
1. Make sure that the process is set to STOP and it will not be started during transportation.
2. Visually inspect that there are no loose parts, and everything is secured in place.
3. Check the inclinations, approach angle, and departure angle of the machine.
5
°
°
15
Figure 6: Maximum inclinations
NOTICE:
On steep slope, the back end/engine must be on the downhill side.
10
°
*5
°
Figure 7: Maximum approach and departure angle
* The ground clearance of the screen end (5°) can be increased by lifting the screen. For instructions,
see “Increasing the ground clearance”.
NOTICE:
Check the current angle of the machine from the spirit levels and
keep checking the angles during track driving.
4. Open the door of main control center.
