16
7 AMI 70 en
6.10
Non-Incendive Field Wiring
Apparatus Installation Drawing
INSTALLATION NOTES:
Entity Parameters: AMI96_____:
Ui = 37 Vdc; Ii = 150 mA ; Ci = 0.0 nF; Li = 0.0 mH; Pi = 3.0 W
1. Installation shall be in accordance with ANSI/ISA RPA12.6.01, ANSI/NFPA 70, and the National Electrical Code.
2. Dust-tight conduit seal must be used when installed in Class II and Class III environments or where Ingress Protection of
IP67 is required.
3. Control equipment must be FM approved to supply power in Class I, Division 2 Areas.
4. Power Limiting Associated Apparatus must satisfy the conditions: Voc or Vt < Vi, Isc or It < Ii, Ca > Ci + Ccable,
La > Li + Lcable of the AMI96_______ Entity Parameters
5. Manufacturer's associated non-incendive field wiring apparatus installation drawing must be followed when installing this
equipment.
6. Parts of the enclosure are non-conducting and may generate an ignition-capable level of electrostatic charge under certain
extreme conditions. The user should ensure that the equipment is not installed in location where it may be subjected to
external conditions (such as high-pressure steam) which might cause a build-up of electrostatic charge on non-conducting
surfaces. Additionally, cleaning of the equipment should only be done with a damp cloth.
7. Substitution of components may impair hazardous location safety.
3
4
2
1
5
6
HAZARDOUS
(CLASSIFIED)
LOCATION
NON-HAZARDOUS
(SAFE AREA)
LOCATION
1
2
Nonincendive Field Wiring Apparatus
NI; Cl I,II,III Div 2
Groups A,B,C,D,F,G
3
AMI96__ Enclosure
Quick Connector Pin-out
indicated below (if used)
Control
Equipment
AMI96 Terminal
Identifiers
Aux IN1 - (7)
ASI - (9)
Aux IN + (8)
Aux IN2 - (6)
OUT 2 - (3)
3 wire RTN (5)
OUT 2 + (4)
OUT 1 + (2)
ASI + (10)
OUT 1 - (1)
Power Limiting
Associated Apparatus
4
5
ASI +
ASI -
AMI96_____* models approved as Non-Incendive Field Wiring Apparatus:
* Any Conduit/Connector option and Visual Indicator option is approved.
6
PIN
SIGNAL
1
ASI+
2
Not Used
3
ASI-
4
Not Used
4-PIN MICRO-CONNECTOR
MALE (PINS)
4
3
2
1
4-PIN MINI-CONNECTOR
MALE (PINS)
1
3
4
2
PIN
SIGNAL
1
ASI+
2
Not Used
3
ASI-
4
Not Used