Page 12
Safety notes for electrical drives and controllers
Mounting Instructions „Servo drives BL 4000-C“
PRELIMINARY
Version 0.1
Until the built-in monitors come into effect, faulty drive movements must be taken into account; their
magnitude depends on the type of control and on the operating state.
DANGER!
Dangerous movements!
Danger to life, risk of injury, serious personal injuries or property damage!
For the reasons mentioned above, personal protection must be ensured by means of monitoring or
superordinated measures on the device. These are installed in accordance with the specific data of the
system and a danger and error analysis by the manufacturer. The safety regulations applying to the
system are also taken into consideration. Random movements or other malfunctions may be caused by
switching the safety installations off, by bypassing them or by not activating them.
2.4.6
Protection against contact with hot parts
DANGER!
Housing surfaces may be hot!
Risk of injury! Risk of burning!
Do not touch housing surfaces in the vicinity of heat sources! Danger of burning!
Before accessing devices let them cool down for 10 minutes after switching them off.
Touching hot parts of the equipment such as the housing, which contain heat sinks and resistors,
may cause burns!
