29
D - Parental lock
Several channels, although broadcasted free-to-air, show adults only programs, not suitable for
a younger audience. We therefore recommend that these channels be locked with a confi den-
tial parental code, to prevent viewers who do not know the code from watching these channels.
The parental lock can be activated in two stages:
1 - Locking channels
• Press OK to display the channels list.
• Press the key
to access the channels edit menu.
• Select
Lock / Unlock
and confi rm by pressing OK.
• Enter the confi dential code (factory preset is 0000).
• You can view each channel by highlighting its name in the list.
• Press OK for each channel to be locked. A padlock appears next to it.
• Once you have fi nished, press the
key and, with
Yes
displayed, confi rm your selections
by pressing OK.
2 - Locking a menu and channels
• Go to MENU /
User Setting
/
Parental Lock.
• Enter the confi dential code (factory preset is 0000).
• On the
Channel Lock
line, make sure that
Yes
is displayed. This is the factory preset by
default; therefore, you should not need to change it.
• On the
Install Lock
line, display
Yes
by pressing the
4
key.
@
Note: When activated, the
STB Lock
setting requires that the PIN code be entered
each time the receiver is switched on, even when viewing unlocked channels.
• Move to the
Change PIN
line and press OK.
• Enter the current 4 digit confi dential code (factory preset is 0000).
• Enter the 4 digits of the new PIN code.
• Confi rm the new confi dential PIN code by entering its 4 digits one more time.
• Exit this option by pressing EXIT.
Important: Keep the new PIN code in a safe place. Do not forget it, as otherwise
you will need to send the receiver back to our Service Department, for the PIN to
be reset.
E - Digital audio output
Some channels may broadcast Dolby Digital audio (AC3). In order to take advantage of this
technique, you must connect your receiver to your audio amplifi er thanks to a coaxial cable.
• Go to MENU /
User Setting / TV Output.
• On the
Dolby Digital
line, select
On
with
34
arrows .
• Press EXIT to save and exit.
• Put the receiver on a channel that broadcasts AC3 (eg Pro Sieben on Astra 19).
• Press the
key, the audio menu appears on the top left of the screen.
• With arrows, select the line AC3.
• Press OK to confi rm. The analog audio outputs on RCA or scart are then muted. The sound
volume must now be adjusted with your amplifi er.
