28
Basic timer
To switch the receiver on/off at a specific time, the basic timer is all you need. For example,
it allows you to switch the receiver on at the start of your favourite program, or to program a
single recording at a later time. If a more complex programming is required, please refer to the
next section. To program the basic timer, proceed as follows:
• Put the receiver on the channel you want to record
• Go to MENU /
Timer Function / Timer Setup
• On the
Turn on
line, Select
On
with
34
arrows
• On the
Turn on time
line, enter the time for wake-up
• If you want the receiver to switch off automatically, select
On
on the
Turn Off
line and
enter the sleep time on the
Turn off
time line.
• Press EXIT to save and exit
Advanced timer
The basic timer allows to program simple event : wake up on one channel. The advanced
timer allows more complex operations (up to 20 events), especially multiple events on
different channels or recurring events.
• Put the receiver on the channel you want to record
• Go to MENU /
Timer Function / VCR Timer Setup
• On the
Timer
line, select the number of the timer you want to edit (1 for the fi rst time )
• On the
Mode
line, select VCR with
34
arrows. (you can use Reminder if you just want to
be warned when a program starts)
• On the
Channel
line, check that the channel name is correct. If not, you can change with
34
arrows but it’s faster to exit, go to the correct channel and come back in this menu.
• On the
Start date
line, press OK to display the calendar and select the date of the pro-
gram.
• On the
Start time
line, enter the time for wake-up
• On the same way, select
Stop Date
and
Stop time
.
• On the
Type
line, select if the event happens
Once, daily, weekly
or
monthly
.
• Press OK on the
Store
line to save and exit
