11
C - Adjustment of the polarisation
Rotate the LNB clockwise in its holder for a few degrees to further increase the quality of signal. If the signal
decreases, rotate it in the opposite direction.
Once you obtain the best signal, tighten definitively all the screws. Your installation is finished. Press on EXIT
to hide the information banner. You can now watch all the satellite channels from the satellite you just aligned
your satellite dish on.
A - Installation of a bi-head satellite dish Astra / HotBird
This paragraph explains how to install a separated switch or a monobloc (dual LNB with integrated
switch)
In both cases, you must first declare the switch input for each satellite, and then align the dish(es)
Swich declaration
• Go in MENU /
Installation / LNB Setup.
• On the
Satellite
line, select
Hotbird
with
34
arrows.
• On the
DiSEqC switch
line, select
Tone A
with
34
arrows.
• On the
Store
line, press OK to save this setting.
• On the
Satellite
line, select Astra1 with
34
arrows.
• On the
DiSEqC switch
line, select
Tone B
with
34
arrows.
• On the
Store
line, press OK to save this setting
• Press EXIT to quit the menus.
3 - Installation on several satellites
