29
In viewing mode,
56
keys allow me to change some channels among the list of the pre-
programmed channels. You can also reach directly a channel by entering its number. Pressing
on the OK key makes the TV channel list appear, highlight then the channel you want to
watch with the Up and Down arrow or Page Up / Page Down keys, and press OK to view the
channel.
11 -
Access to a channel
12 - Adding channels
You can either add a particular channel if you know its parameters (frequency, polarity, SR),
or you add a new unknown channel (update).
A - Add channels from a transponder
A channel is transmitted by what we call a
transponder. It is a relay satellite of which should
known the 4 following parameters:
• Its frequency (e.g. 12551 MHz).
• Its debit of symbol SR (e.g. 22000)
• Its polarity (e.g. Vertical)
• The satellite from which it is transmitted (e.g.
Astra 28.2).
You will find these parameters in specialised
magazines, which provide a monthly update,
or on dedicated websites (www.satcodx.com,
www.lyngsat.com,…).
To add channels from a transponder, do the following steps:
• Go to MENU /
Installation / Manual Scan.
• On the line
Satellite
, select with
34
arrow keys the satellite that broadcasts the channel
you want to add.
• On the line
TP Freq
, press OK to access to the list of transponders (TP).
• With the
56
arrows, select the correct TP. If you don’t find the TP in the list, come back in
the Manual Scan menu, press the green key (lock), select Add and fill in the field TP Freq,
Symbol Rate and
Polarisation
and press then twice on OK, the new transponder will now
appear at the bottom of the list.
• Check that the
Quality
is higher than 40%. If not, it means that the parameters your keyed
in are wrong, or that you are not on the correct satellite.
• On the line
Scan Mode
, choose
FTA Only
in order not to fill the channel list with encrypted
channels that you may not view. On the line
Network Search
, keep
OFF
.
• Press on the red key (back arrow) to launch the search.
• A windows opens, listing the new channels found.
• When the scan is over, press OK to store the new channels at the end of the channel list.
• Press EXIT to exit all menus.
