34
A - Language selection
In order to choose the language of the On-Screen-Display menu :
• Press the MENU key and then the
4
arrow key to select the Config submenu (the most right one).
• Select the first sub menu and press OK.
• On the first line, select the OSD language with the
4
arrow key.
• Press the black key to save and exit.
B - TV scart settings
In the MENU /
Config / Video Output,
you can adjust the video signal that comes out of the
TV scart;
On the line
TV Mode
, leave
AUTO
. You can, if you want, force the output to
PAL
or
NTSC
if
your TV set has special requirements.
On the line
Screen mode
, you must select the size of your TV set :
4:3
or
16:9
. Attention,
select
16:9
only if you have a widescreen TV. This setting is related to the TV set, not the
program you’re watching.
On the line
Video Output
, you can choose between
CVBS
or
RGB
. CVBS is universal mode
that works with all TV sets, but RGB gives better picture. If you select RGB, the CVBS output
is disabled, so you can’t use, for example, a video sender on the video cinch (RCA) output.
C - Time settings
Go to MENU /
Config / Time settings
, you can adjust the video signal that comes out of the
TV scart.
On the line
Time Zone
, select the correct value. In UK, GMT in winter time, and GMT +1 in
summer time.
This operation resets the memory, including all settings, as the channel list.
Beware, all the modifications you carried out will be lost.
To reset the receiver, do the followings :
• Go to the MENU /
Config
/
Factory settings
• Enter the secret code (0000 if you didn’t change it).
15 - Resetting the receiver
14 - Miscellaneous settings
