24
6 -
Connection on a dual-head system Astra + Hotbird already aligned
Connect the cables and the leads as indicated on the figure below (figure n°4). It is useful to
know on which inputs of the switch the heads Astra and Hotbird are connected. If you do not
know it and the installation is difficult to reach, test the 2 possible combinations:
Astra on A and HotBird on B or Astra on B and HotBird on A.
To program your receiver, go to page 11, installation of a Bi-head satellite dish Astra 19,2° + Hot
Bird.
Caution: you should not alter the satellite dish adjustments or the switch, it is
only necessary to program your digital receiver.
DiSEqC 1.0 or Tone Burst
switch
Rear
TouchBOX 3
Coaxial cable
Scart cable