17
D - Connection
For the installation you will need 2 pie-
ces of cable. The first one, roughly 1,5m
(5ft) to go from the LNB to the motor,
the second one as long as it takes to go
from the motor to the receiver.
Prepare the cables and assemble the
“F” plug at the end of the cable.
Respect the dimension indicated on
the diagram 4; the plug must screw
on the aluminium foil rolled up on the
outer sheath. Make sure that none of the braid strand is in contact with the central core of the
cable.
Connect the receiver to the television set with a scart lead. Put the motor near the receiver,
on a table or on the floor, and connect the receiver LNB input to the Motor RECEIVER output
with the 1,5m (5ft) cable, then switch on the receiver.
(2)(3)
see related paragraph page 13
DEMO
LNB
VCR /
TV
L/G
R/D
100-250V~
50/60Hz
14W
VIDEO
AUDIO
5
receiver
E - Reset the motor
The reset of the motor is to reset its position, and put it at 0°, which means full south.
Go into the DiSEqC 1.2
(2)
menu and then reset the motor
(3)
.
• The motor will reset while looking for his reference position.
4