The satellites emits not only TV channel, but radios as well in digital quality. You then
advise you to connect the receiver to your Hi-Fi system with 2 RCA / 2 RCA flylead. This
remarks is for the TV channels as well!
When you push on the key
Ø
, you enter the radio mode. Then, when you push the OK
key the Radios list will appears, and you will not see any image on the screen. The menu
channel list and parental control
allow you to personalize the radios list. You can use the
Digital PVR, but the function time-Shift does not work in radio mode. Press on the
Ø
key
to go back to the TV mode.
13
Radios
14
Electronic stops adjustment
If your motor does not go east home anymore or west home (which means until it mecha-
nical stop), it is probably because an electronic stop prevent it to. You then have to reset
the electronic stops.
• Go into Menu /
Motor adjustment
/
Put the limits.
• Go down on the row
erase the limits
and press on OK, the button OK flashes.
• Go up on the row
movement E/O
and press on the arrow
3
• Wait until the satellite dish stops onto its east stops.
• Go down on the row
place limit east
and press on OK, the button OK flashes.
• Go up onto the row
movement E/O
and press on the arrow
4
• Wait until the satellite dish stops on its west stops.
• Go down onto the row
place the limits
west and press on OK, the button OK flashes.
• Press on Exit to leave and come back in TV mode.
15
Mechanicals stop adjustments
Warning: do this adjustment is an absolute necessity.
This adjustment may be necessary if you fixed your motor on a gable. From set up, the
stops are adjusted at 45° East and 45° West.
This adjustment is suitable for a fixing on a gable if your stand off arm is at least at 45cm
from the wall and the wall faces full south.
If it is not the case you need to limit the movement of the dish to avoid it to be damaged
against the wall.
This adjustment must be done when the dish is set up on the motor.
28
