METRON QA-IDS, User & Service Manual

Page: 21 / 62

2. Example Printout of an Occlusion Test.
METRON QA-IDS Infusion pump tester Ver.
1.17
Serial no.:
Operator : Establishment :
- - EQUIPMENT INFORMATION - -
Equipment Code : ___________________________________________
Serial no. : ___________________________________________
Status : ___________________________________________
Group : ___________________________________________
Manufacturer
:
___________________________________________
Type : ___________________________________________
Model : ___________________________________________
Location : ___________________________________________
- - SETUP DATA OCCLUSION TEST - -
Flow set : ml/h Pump type :
Alarm pressure : mmHg
Occlusion
Test no.
Alarm time
(mm:ss)
Bolus
(ml)
Alarm pressure
(mmHg)
Stop pres-
sure
(mmHg)
*****************************************************************
*********
- - TEST SUMMARY - -
No. of occlusion
tests :
Mean alarm time :
Mean bolus : ml
Mean alarm pressure : mmHg Mean stop pressure :
Comments : ___________________________________________
___________________________________________
Date-Time/Signature ______________________________
The tested equipment and comments portions enable the operator
to manually enter appropriate remarks.
3. Presentation of Measuring Data
Instant Flow: Flow rate measured during the last interrogation.
Maximum Flow: Max. flow detected during one interrogation period.
Minimum Flow: Min. flow detected during one interrogation period.
Mean flow: Mean flow from start of test till elapsed time.
Cumulative Volume: Accumulated or delivered volume during the test.
Measured Pressure: Measured pressure in the flowline.
Elapsed Time: Elapsed time from start of test.
Time Left: Time left of a preprogrammed test sequence.
Delay Time: Delay for calculation of measuring values for a test.
4. Scaling Conversion from mmHg to Selected Pressure Unit
mmHg = 1 kg/cm 2 = 0.0013
21