METRON QA-IDS, User & Service Manual

Page: 15 / 62

3.4 Display Menus and
Messages
1. Startup Screen . The following screens will be displayed
in sequence for the first two seconds after the QA-90 has
been switched ON.
2. Main Menu
This window offers the following functions:
•
Press Occlusion Test (F5) to go to the Occlusion Test
Setup Screen. See paragraph 3.4.5 below.
•
Press Flow Measurement (F6) to go to the Flow Measure-
ment Test Setup Screen. See paragraph 3.4.6 below.
•
Press Equipment Code (F7) to record the code or name of
the device under test. Press Enter (
↵
) to store.
3. PRIME (F1). When PRIME (F1) is pressed, the follow-
ing display will appear:
•
Press GO BACK (F2) to return to the main menu.
4. SETUP (F3)
This function is used for entering general information in con-
nection with the test. Three main displays are shown below.
•
Press Operator (F6) to record the operator’s name or ini-
tials.
15