METRON QA-IDS, User & Service Manual

Page: 17 / 62

•
Press Flow Set (F7) to set the preset value of the infusion
pump.
•
Press Alarm Prsr (F6) to set the preset pump value.
•
Press START (F2) to start the Occlusion Test, and the fol-
lowing display will appear:
The following parameters are displayed:
Prsr: The pressure in the connction tube. Measurement results
display: max. value > instantaneous measured value >
mean value in mmHg.
Time: The time from test start until alarm activation. Measure-
ment results display: max. time > elapsed time > mean
time in minutes/seconds.
Bolus: The volume expansion within the tube when the infusion
pump alarm activates. Measurement results display: max.
bolus > last executed calculation after STOP is pressed >
mean bolus in milliliters.
•
Press GO BACK (F4) to return to the previous menu.
•
Press STOP (F2) to stop the test.
•
Press START (F2) to return to the previous menu.
•
Press GO BACK (F4) to return to the previous display.
6. Flow Measurement (F6)
This function is used for entering flow information in connec-
tion with the test. There are four main displays, shown below:
17