THM1176/TFM1186 Use
r’s Manual
v 2.0 r 1.0
– 02/20
Copyright © 2020 Metrolab Technology SA
www.metrolab.com
3
GETTING STARTED
2-
Quick Start Guide
2-1 KIT CONTENTS
Your shipment should contain:
•
A THM1176 or TFM1186
magnetometer. If you ordered a
“Duo Kit”, you will receive two
probes.
•
A calibration certificate.
•
A zero-gauss chamber, for
measuring and adjusting the probe’s
zero offset. The TFM1186 does not come with a zero-gauss chamber
– see
the note in Section 2-6, Precautions.
•
A USB thumb drive with the software and documentation.
•
A carrying case.
•
Optionally, if you ordered the Handheld Kit, a ruggedized Windows tablet.
In addition to the tablet itself, you should receive:
o
a Mini-USB to USB-A adapter cable;
o
a pistol grip with an extension battery; and
o
a charger with adapter plugs for Europe/Switzerland, U.K., U.S. and
Australia.
2-2 WINDOWS SOFTWARE INSTALLATION AND REMOVAL
2-2-1
Software Installation
The order in which you perform the following steps is not important:
•
Run the EZMag3D installer, Metrolab-EZMag3D-InstallerWindows.exe,
following the on-screen instructions.
•
Run the installer for the libusbK device driver, InstallDriver.exe, following
the on-screen instructions.