Autolab/Electronic load combination
25 |
P a g e
Figure 17 – Select the
External manual control
option to open the manual control of the
electronic load
The Autolab display will be shown, with an additional panel below it (see Figure
18).
Note
The Current value shown in the Autolab control window corresponds to the
current measured by Autolab. Since the Autolab is not connected to the cell,
this value will be 0 and needs to be ignored at all times. All the manual settings
available in the Autolab display (iR compensation, current range, …) are also
irrelevant for this application.
