manualshive.com logo in svg

Metrohm 863, Manual

Share
Download
Metrohm 863 Manual Download Page 36

4.5 VA 797 Remote start

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

28

￭￭￭￭￭￭￭￭

863 Compact Autosampler

￭

Wait for the pump time to be completed

￭

Switch off the peristaltic pump

￭

Wait for the stepping pulse

4.5 

VA 797 Remote start

This method template is suitable for sample transfer to a 797 VA Compu-
trace. The actual pump time is determined by the control software.

The sample series is started on the 797 VA Computrace (Remote Start).

Preparing and starting the sample series

 

1

Press 

[START]

.

 

2

Under 

Number of samples

, enter the number of samples or the

maximum value of 

99

.

 

3

Under 

Next sample pos.

, enter the rack position of the first sample

to be processed.

 

4

Press 

[BACK]

.

 

5

Start the sample series in the 

VA Computrace

 software.

NOTICE

The method run will be automatically restarted for every sample via
remote connection (Autostart). A stepping pulse of the connected
instrument is expected at the end of the method run. The 863 Compact
Autosampler must be stopped manually by means of the button

[STOP]

 after the processing of the last sample.

The individual steps of the method:

￭

Move to the sample

￭

Lower the lift to the work position

￭

Wait for the stepping pulse

￭

Switch on the peristaltic pump for the sample transfer

￭

Wait for the minimum pump time to be completed

￭

Wait for the stepping pulse

￭

Switch off the peristaltic pump

￭

2 seconds waiting time

￭

Wait for the stepping pulse

Summary of Contents for 863















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands