manualshive.com logo in svg

Metrohm 863, Manual

Share
Download
Metrohm 863 Manual Download Page 32

4.1 Sample with air gap

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

24

￭￭￭￭￭￭￭￭

863 Compact Autosampler

4  Automation sequences

NOTICE

The following method sequences and parameters can only be used if
the 863 Compact Autosampler is 

not

 controlled by a PC software (e.g.

MagIC Net) via USB connection.

4.1 

Sample with air gap

This method template is suitable for simple determinations.

An air gap is formed in the transfer tubing between the individual sam-
ples.

Preparing and starting the sample series

 

1

Press 

[START]

.

 

2

Under 

Number of samples

, enter the number of samples or the

maximum value of 

99

.

 

3

Under 

Next sample pos.

, enter the rack position of the first sample

to be processed.

 

4

Press 

[BACK]

.

 

5

Start the sample series in the 

IC Net

 software.

NOTICE

The method run will be automatically restarted for every sample via
remote connection (Autostart). A stepping pulse of the connected
instrument is expected at the end of the method run. The 863 Compact
Autosampler must be stopped manually by means of the button

[STOP]

 after the processing of the last sample.

The individual steps of the method:

￭

Move to the sample

Summary of Contents for 863















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands