Metrohm 863 Manual Download Page 28

Page: 28 / 78

3.7 Connecting a keyboard, printer and other USB devices

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

￭￭￭￭￭￭￭￭

863 Compact Autosampler

6.2151.100

Figure 9

Connecting USB devices

CAUTION

Switch the instrument off before connecting or disconnecting a USB
device or a USB stick.

The 863 Compact Autosampler can only recognize the device immedi-
ately after switching on.

The following devices can be operated

directly on the USB connector

with the 6.2151.100 adapter

￭

USB sticks (for the backup or storing of methods)

￭

6.2147.000 numerical USB keypad

￭

USB hub (with or without an own power supply)

The

6.2147.000 numerical USB keypad

serves for comfortable numer-

ical input and for navigating in the dialog. In addition, it provides two USB
connectors. Connect additional USB devices to the keypad.

NOTICE

Most of the USB devices need a so-called hub in order to work cor-
rectly.

A USB hub is a distributor to which several USB devices can be con-
nected. USB hubs are available in specialty stores in a number of differ-
ent models.

The USB (OTG) connector of the 863 Compact Autosampler has no
such hub. The 6.2147.000 numerical USB keypad has a USB hub and
two USB connectors.

The following devices can

only be connected to a 6.2147.000

numerical keypad or to a USB hub

￭

Printer (with USB connector, use the 6.2151.020 connecting cable)

Summary of Contents for 863















































































Search results

Summary of Contents for 863

Reviews:

Brands by name

Popular brands

Metrohm 863, Manual

Search results

Summary of Contents for 863

Reviews:

Brands by name

Popular brands