manualshive.com logo in svg

Metrohm 863, Manual

Share
Download
Metrohm 863 Manual Download Page 13

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

1 Introduction

863 Compact Autosampler

￭￭￭￭￭￭￭￭

5

1.3.4 

Personnel safety

WARNING

Wear protective goggles and working clothes suitable for laboratory
work while operating the 863 Compact Autosampler. It is also advisable
to wear gloves when caustic liquids are used or in situations where
glass vessels could break.

WARNING

Always install the safety shield supplied with the equipment before
using the instrument for the first time. Pre-installed safety shields are
not allowed to be removed.

The 863 Compact Autosampler may not be operated without a safety
shield!

WARNING

Personnel are not permitted to reach into the working area of the
instrument while operations are running!

A 

considerable risk of injury

 exists for the user.

WARNING

In the event of a possible blockage of a drive, the mains plug must be
pulled out of the socket immediately. Do not attempt to free jammed
sample vessels or other parts while the device is switched on. Blockages
can only be cleared when the instrument is in a voltage-free status; this
action generally involves a 

considerable risk of injury

.

WARNING

The 863 Compact Autosampler is 

not

 suitable for utilization in bio-

chemical, biological or medical environments in its basic equipment ver-
sion.

Appropriate protective measures must be implemented in the event
that potentially infectious samples or reagents are being processed.

Summary of Contents for 863















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands