manualshive.com logo in svg

Metrohm 863, Manual

Share
Download
Metrohm 863 Manual Download Page 20

3.3 Connecting a computer

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

12

￭￭￭￭￭￭￭￭

863 Compact Autosampler

Cable connection and driver installation

A driver installation is required in order to ensure that the 863 Compact
Autosampler is recognized by 

MagIC Net

. To accomplish this, you must

comply with the procedures specified. The following steps are necessary:

 

1 Installing the software

￭

Insert the MagIC Net installation CD and carry out the installation
program directions.

￭

Exit the program if you have started it after the installation.

 

2 Establishing the cable connections

￭

Connect the instrument to the power grid if you have not already
done this.

￭

Connect the instrument to a USB connector (type A) of your com-
puter (see manual of your computer). The 6.2151.110 cable is
used for this purpose.

6.2151.110

Figure 4

Connecting the computer

The instrument is recognized. Depending on the version of the Win-
dows operating system used, the driver installation proceeds differ-
ently afterwards.

￭

Either the necessary driver software is installed automatically or an
installation wizard is started.

 

3

Follow the instructions of the installation wizard.

If problems should occur during installation, contact your company's IT
support team.

Registering and configuring the instrument in MagIC Net

The instrument must be registered in the configuration of MagIC Net.
Once that has been done, you can then configure it according to your
requirements. Proceed as follows:

Summary of Contents for 863















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands