1.2 Development of a method
799 GPT Titrino: Getting started
5
Entry of the sample size
<SMPL DATA>
You also need the sample size for the calculation of your
result. Enter it with the <SMPL DATA> key:
Place the cursor to "smpl size" and enter 2.
Select the unit "ml" for the sample size using the <
←
>
or <
→
> keys and confirm with <ENTER>.
The result is recalculated.
Viewing the titration curve
<
←
> or <
→
>
<
←
> or <
→
>
You can view the titration curve after the titration using
the <
←
> or <
→
> keys.
With the <
↑
> and <
↓
> you can trace the curve. To the
left the measured values of the current point are dis-
played. On the first line you will find the index of the
point.
At the equivalence point, you find its ERC (see Instruc-
tions for Use page 21, 22) and its volume.
Quit the curve display with <
←
> or <
→
> key.
Selection of the automatic report output
<DEF>
<
↓
>
<ENTER>
<
←
> or <
→
>
<ENTER>
2 x <QUIT>
If you have a printer connected, you can select the re-
port blocks to be printed out automatically at the end of
the titration.
Press <DEF> and place the cursor to ">report".
Press <ENTER> to define the report output.
(If you have your printer connected to COM2 press
<ENTER> once again.)
Select the individual report blocks with the <
←
> or
<
→
> keys. Use a ";" as delimiter between the report
blocks. If you wish to print out a curve and a full result
report, set "curve;full".
Confirm the entry with <ENTER> and quit the inquiries
with <QUIT>
smpl data
id
#
1 or C21
id
#
2 or C22
id
#
3 or C23
smpl size 1.0 g
smpl unit: g
def
>report
report COM1:curve;full
