Metrohm 2.942.0500, Manual, Page: 54 / 63

5.3 Metrohm Suppressor Module (MSM)
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
46
￭￭￭￭￭￭￭￭
942 Extension Module Vario SeS/PP (2.942.0500)
Replacing parts of the Metrohm Suppressor Module (MSM)
1 Disconnecting the Metrohm Suppressor Module (MSM) from
the IC system
￭
Switch off the instrument.
￭
Disconnect all capillaries of the MSM from the IC system.
2 Dismantling the Metrohm Suppressor Module (MSM)
￭
Unscrew the union nut (12- 1 ) from the housing (12- 4 ) .
￭
Pull the connecting piece (12- 2 ) out of the housing together with
the rotor (12- 3 ) .
If the rotor gets stuck in the housing, you can push it out as fol-
lows:
Put a pointed object into the slot in the housing and use it to
push out the rotor.
￭
Loosen the connecting piece from the rotor with a turning move-
ment.
3 Cleaning the new rotor
￭
Clean the sealing surface of the new rotor (12- 3 ) with ethanol
using a lint-free cloth.
4 Inserting the new rotor
CAUTION
The rotor may be destroyed during start-up if it is not inserted cor-
rectly.
NOTICE
The adapter (6.2842.020) (see "Inserting small rotors", page 23) is
required in order to insert a small rotor into the suppressor drive.