3.3 Base tray and bottle holder
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
14
￭￭￭￭￭￭￭￭
942 Extension Module Vario SeS/PP (2.942.0500)
￭
The instrument is switched off.
Accessories
￭
3 mm hex key (6.2621.100)
1
2
3
Figure 7
Mounting the bottle holder
1
Mount the bottle holder onto the topmost instrument in such a way
that the openings in the bottle holder exactly match the screw
threads on the top surface of the instrument.
2
Insert the 2 cylinder screws and tighten them with the 3 mm hex key.
3
Insert both covering stoppers.
After attaching the bottle holder, restore all connections that were loos-
ened at the beginning of the process.
Restoring the loosened connections
1
Plug in all necessary USB cables.
2
Plug in all necessary MSB cables.
3
Plug in the power cord.
4
Mount the drainage tubing again
(see manual of the IC instrument)
.
A longer section of silicone tubing (6.1816.020) may have to be cut
to size and mounted
(see also the manual for the IC instrument)
.