manualshive.com logo in svg

Metro DataVac AccessPoint, Operator'S Manual, Page: 92 / 110

Share
Download
Metro DataVac AccessPoint Operator'S Manual Download Page 92

A-4

Metro

®

 AccessPoint™ Mobile Computing System Operator Manual

Revision 1.0

LO1-530

Troubleshooting: Power Supply and Battery

If this problem continues, contact InterMetro Customer Service.

Battery Pack Overheating, Critical

System will shut down in 2 minutes.

Immediately turn off computer equipment and then the power supply.

Let cool for 2 hours.

Turn on the power supply and restart the computer equipment.

If this problem continues, contact InterMetro Customer Service.

Power Supply Low Temperature

System temperature below 0 °C (32 °F) has been detected. Ambient 
temperature is below operating range, temperature sensor has failed or 
has become disconnected.

If power supply or its workstation are in an area where the temperature is 
below 0 °C (32 °F - freezing), move to an area of ambient temperature 
above 0 °C (32 °F - freezing), otherwise

Turn off computer equipment and then the power supply.

Turn on the power supply and restart the computer equipment.

AC/DC

DC1, DC2, DC3

Summary of Contents for AccessPoint















































































































Reviews:

No comments