manualshive.com logo in svg

Metro DataVac AccessPoint, Operator'S Manual, Page: 20 / 110

Share
Download
Metro DataVac AccessPoint Operator'S Manual Download Page 20

2-2

Metro

®

 AccessPoint™ Mobile Computing System Operator Manual

Revision 1.0

LO1-530

Getting Started: Getting Started with the Workstation

Getting Started with the Workstation

Unpacking

The AccessPoint workstation will arrive fully assembled and fully functional 
at the customer’s site (most accessories do not ship assembled to the 
workstation). After cutting the strapping bands, lift the top of the box over 
the workstation. In order to avoid any injury, two (2) people should lift the 
workstation from the padding blocks.

Inspection

After the AccessPoint workstation has been unpacked, inspect the unit for 
any shipping damage. If there is any damage, contact InterMetro Customer 
Service immediately.

Shipment of Power Supply

CAUTION

Before placing the Power Supply (Li-Nano, SLA, LiFe) into 
service on a AccessPoint workstation, the power supply 
batteries may need to be connected. Depending on the 
shipment, they may or may not be connected due to USDOT 
and IATA regulations.

The Power Supply is available in 3 battery chemistry options. Depending on 
the battery chemistry, the preparation of the shipment is different.

Lithium Iron Phosphate Battery (LiFe)

The LiFe Battery can be connected or disconnected and requires a fully 
regulated Class 9 shipment in any shipping mode. The shipper must be 
certified for Li-Ion Class 9 shipments. The power supply must be shipped 
per “UN3481, Lithium ion batteries contained in equipment” on cargo 
aircraft only.

The power supply contains one battery pack. Ratings below given per 
battery pack:

Summary of Contents for AccessPoint















































































































Reviews:

No comments