1.800.221.0932
|
2
1.
Unclip and remove the trim panel
around the factory radio including the
a/c vents. (Figure A)
2.
Remove (4) Philips screws securing the
factory radio then unclip and remove
the radio. (Figure B)
Continue to Kit Preparation
(Figure B)
(Figure A)
1.
Attach the (2) included
clip legs
onto
the
radio trim panel
using (4) #6 x 3/8”
Phillips screws supplied.
Note:
The clip legs will only go on one
way. (Figure A)
2.
Attach the
radio brackets
to the
radio
trim panel
using (4) #(8) x 3/8” Phillips
screws supplied. (Figure B)
2.
Attach the
panel clips
to the
clip legs
.
Continue to Kit Preparation
DASH DISASSEMBLY
KIT PREPARATION
(Figure B)
(Figure A)
