|
29
PROVENO E
Rev. 1.2 (24.08.2016)
Operation instructions
4.2.10. Automatic water fi lling (option)
Press once.
Select the amount to be fi lled.
Start fi lling by pressing once again.
The selected amount of cold water fl ows automatically into the kettle. The display shows all the time the
amount in litres poured into the kettle.
Stopping/cancelling the automatic water fi ll
Interrupt water fi ll by pressing once.
Water fl ow will immediately stop. The amount of water fi lled is shown on the display for 10 seconds. The
display goes off to indicate that the function has been cancelled/stopped.
Changing the amount of automatic water fi ll during fi lling
Interrupt the function by pressing once. The display shows the selected amount in litres.
Select the new amount to be fi lled within 10 seconds. You can select the amount to be fi lled
between the fi lled amount and the kettle’s net volume.
Continue fi lling by pressing once.
When the automatic water fi ll is completed, the fi lled amount is shown on the display for 10 seconds,
after which the display goes off. The fi lled amount is saved in the memory until the kettle’s control voltage
is cut, and it can be displayed by pressing the automatic water fi ll button once.
Manual water fi ll
Press and keep pressed.
Cold water fl ows into the kettle as long as the button is held down. The display shows all the time the
amount of water in litres. The display goes off and sets to zero soon after the water fi ll is completed.
In case water supply to the appliance is prevented, the display shows an error message ’Err’. Check that
the water supply closing valve is open.
