|
25
PROVENO E
Rev. 1.2 (24.08.2016)
Operation instructions
4.2.4. Cooking
Switch on the appliance. ’On’ appears on the temperature display.
Press the temperature button once.
Select temperature with the central dial.
When the temperature starts to blink on the display, you can select the desired temperature using the
central dial. The set value is automatically saved in the memory after about three seconds, temperature
blinking stops on the display and the kettle starts to heat. If you did not manage to set the temperature
while the temperature display was blinking, press the temperature button again and select the desired
temperature with the central dial.
Temperature setting and temperatures displayed:
0 - 50°C
kettle inner surface temperature on the display
51 - 100°C food temperature on the display
101 - 120°C steam jacket temperature on the display
Heating is only switched on when the kettle is in an upright position (cooking position). If the heating fun-
ction is selected when the kettle is not in an upright position, the message ’PoS’ appears on the display
indicating that the heating will not switch on because the kettle is not in the cooking position. Open the
lid and revert the kettle to the cooking position.
When the kettel reaches the set temperature for the fi rst time a short buzzer sound is heard. This functi-
on is available when the user parameter Pr21 is set to ON.
Then turn the handle aside.
Make sure that the mixing tool is locked in its
place by trying to lift/pull it out of its place by
pulling at the mixer blade, for example.
It is easiest to attach the mixing tool to the mixer axle
when the kettle is in a tilted position. Push the ring on the
mixing tool into the kettle’s mixer axle and fi t the mixing
tool in place, while the lifting handle is straight so that the
locking device of the lifting handle sets in the groove at
the upper end of the mixer axle.
