|
15
PROVENO E
Rev. 1.2 (24.08.2016)
Safety
2.3.1. Avoiding burns
• Beware of the inner surface, the upper rim and the lid that may be hot.
• Beware of hot steam when opening the lid.
• Beware of the hot mixing tool after cooking. Use protective gloves.
• Do not open the bottom valve or the emptying valve of the steam generator when the kettle is hot
(pressurized).
• Always
make
sure that the mixing speed is appropriate, thus preventing foodstuffs from splashing up
through the holes of the lid.
• Keep the emptying valve of the steam generator closed. Open it only when there is no pressu-
re, i.e. when you plan to empty the steam generator entirely or to remove the cooling water.
• Beware of hot steam and hot surfaces when you add ingredients to the kettle or taste the food you
are preparing.
• When cooling the food, water discharging may be hot
2.3.2. Avoiding risks during mixing and tilting the kettle
• Stop the mixer before opening the lid either with the
or
button.
• Do not push your fi ngers or utensils into the kettle when the mixer is in operation.
• Do not wear scarfs, ties etc. hanging clothing which may catch on the rotating mixer.
• Protect your hair to prevent it from catching on the rotating mixer.
• Do not touch the rotating mixer.
• Operating the mixer when the lid is open is prevented/prohibited under all circumstances (safety
regulations at work). Special forced slow mixing at 15 rpm is possible if the function is enabled in the
user parameters.
• Ensure that nobody stands behind or in front of the kettle during tilting.
• Do not stand in front of the kettle when you tilt the kettle or reverse it to a horizontal position.
• When tilting the kettle, make sure there are no objects in the space between the kettle and the
pillars or that no objects can fall there when the kettle is being tilted.
• When tilting the kettle, make sure that nobody’s fi ngers, hands or other parts of their body are in
danger of getting between the kettle and the pillars.
• Always
check
that the mixing tool has been locked in place before starting to mix.
• Always
check
that the scrapers have been properly attached to the mixing tool.
2.3.3. Other instructions for correct and safe use
• Stop the mixer before opening the lid either with the
or
button. Stopping
the mixer by opening the lid activates the emergency/stop function.
• Keep the cleaning jet tap closed when the jet is not used.
• The mixing tool is easier to position and remove from the kettle when the kettle is in a tilted position
(ergonomics).
• Protect yourself in an appropriate way when cleaning the kettle (follow safety and handling instruc-
tions of the detergent).
• Do not use the kettle if its protective/cover plates are not properly in place.
• Observe the cleaning instructions. Avoid excessive use of water when cleaning the control pillar. Use
of a high-pressure jet is prohibited. Disconnect the control voltage of the kettle with the ON/OFF
switch and with the mains switch before cleaning the kettle.
