METIEC MT1100 Operation And Installation Manual Download Page 12

 

 
 

 

A1-MT1100 

11 

indicates that the power supply of the adapter is abnormal, and there is 

an audible and optical alarm (sound: The buzzer beeps; light: the icon 

blinks); 

 

4G network signal strength and connection status, strength of full 

grids (4 grids) signal; "OK" means that the device is normally 

connected to the cloud server; "err" means that the device is connected 

to the cloud server abnormally; 

 

WIFI signal strength and connection status, strength of full grids (4 

grids) signal; "OFF" indicates that the WIFI function is disabled; 

"OK" means that the device is connected to the local server normally; 

"link" indicates that the device is connected to the WIFI successfully; 

"err" means that the device is connected to the local server 

abnormally; 

 

Number of TCP clients successfully connected (number of MT500 

devices), 8 at most; 

 

Dynamically refresh the wireless data 

received; 

 

Button prompt; 

Operation Instructions of Buttons: 

Key 1: "▲" key: No function (disabled); 

Key 2: "▼" key: No function (disabled); 

Key  3:  "INFO"  key:  Press  this  key  to  enter  "System  information  interface"  to  view  the  relevant 

information on the equipment; 

Key 4: "MENU" key: Press this key to enter "Setting interface" to set the equipment parameters; 

3.4

 

System Information 

After the equipment is normally started up and enters the main interface, you can press the "INFO" 

button (Key 3) on the main interface to enter the "System information interface", as shown in the picture 

below: 

Summary of Contents for MT1100





















Reviews: