iii
Important Safety Instructions
◆
Only qualified and trained service technicians should attempt to repair the printer.
◆
Do not place the printer on or near a heat source.
◆
Be sure that the output of the power adapter is 24VDC and your power source
matches the rating listed on the power adapter. Be certain your power source is
grounded.
◆
T
o avoid getting an electric shock, do not use a worn or damaged power cord. If
the power cord becomes damaged or frayed, replace it immediately.
◆
Do not insert anything into the ventilation slots or openings on the printer.
◆
The printer and power adapter should never be operated in a location where either
one can get wet. Personal injury may result.
◆
The printhead becomes hot while printing. To protect from damaging the
printhead and risk of personal injury, avoid touching the printhead.
◆
To get increased printhead longevity and higher quality printouts, always use
approved labels, tags and thermal transfer ribbons. Approved supplies can be
ordered from your dealer.
◆
Static electricity that accumulates on the surface of the human body or other
surfaces can damage or destroy the printhead or electronic components in this
device. DO NOT touch the printhead or the electronic components with bare
hands.
◆
Place the printer on a flat, firm, solid surface.
Possible Corrective Action
◆
Never operate in a high temperature environment.
◆
Turn off the power when not in use for extended periods.
◆
Follow all recommendations and setup instructions included in this manual.
www.meteorbarcode.it - [email protected]
