11
Interface Connection
Caution: Make sure the printer is switched OFF before connecting the
interface cable.
The interface between the printer and the host will use either a serial or
USB (or parallel) cable. Contact your reseller for Ethernet connection
options.
1.
The printer identifies the communication port automatically.
2.
The default values of printer port can be obtained from the self-test
report. (See Chapter 2 Operation Basics - System Mode - Self Test)
3.
Cable configurations for serial (RS-232C) and parallel
(Centronics) interfaces are shown in Appendix A of this guide.
4.
Please take the following measures to reduce cable noise.
（
1
）
Reduce the length of the interface cable (keep the cable length
under 1.83 meters / 6 feet) if required.
（
2
）
Keep the communication cable separate from power cords.
www.meteorbarcode.it - [email protected]
