Troubleshooting
71
AMETEK Drexelbrook™
Universal III Mark II Troubleshooting Guide
Service Department (800) 527-6297 FAX(215) 443-5117
Service Dept. Contact
*Tag ID
*Scratch Pad
Analog Loop Assign
*Damping Time
Level Units
Maximum Level
Level Type
Level Configuration
Vessel Configuration
Vessel Units
Maximum Capacity
Vessel Type
True Level Reference
Lower Reference Cap.
Upper Reference Cap.
Capacitance Calibration
Lower Level
Lower Capacitance
Upper Level
Upper Capacitance
Status:
*Serial Number
Software Version
Range Position
AMETEK Drexelbrook
HART® Protocol Software Version
Detailed description of problem:
Level
Vessel
Capacitance
Reference
Loop Current
Percentage
Status
Press F4 For Real-Time View
Type (00/30)
*LRV (4mA)
*URV (20mA)
Vessel Sketch
Show principal tank dimensions, including vessel construction, mounting
location, nozzle, LRV, URV, present level, etc.
Provide as much of the following information as possible.
All
of the information is available from the
Drexelbrook Calibration Software, or from a Rosemount Model 275 with Drexelbrook Device Description
(DD) installed. Information with an asterisk is available from a Rosemount 268 or 275 in the Generic mode.
Electronic Unit Model #
Serial #
Range Jumper Position
Sensing Element Model #
Serial #
Insertion Length
Mounting
Process Material
Temp.
Press.
Other
Customer Name
Company
Phone #
Fax #
City/State
Purchase Order #
DE #
6.15 RCT Series Troubleshooting Guide
AMETEK Drexelbrook
RCT Series Troubleshooting Guide
Service Department (800) 527-6297 FAX (215) 443-5117
Summary of Contents for RCT 10 series
